

| Thrust: | 55 lbs with 27" prop
at 7,000 RPM |
| Weight: | 4.9 LB, incl. starter |
| Length: | 15.25 inches |
| Turbine RPM Range: | 50,000 - 165,000 |
| Propeller RPM Range: | 1500 - 7000 RPM |
| Exhaust gas temp.: | 580°C -710°C |
| Fuel consumption: | 8 oz per/min at full
power |
| Fuel: | Jet A1, 1-K kerosene |
| Lubrication: | approximately 5%
synthetic turbine oil in the fuel |
| Maintenance interval: | 25 hours |


P200 is available NOW!
JetCat P-200 turbine comes complete with HEAVY DUTY starter and includes:
· Jet-tronic ECU (fuel control
electronics)
· GSU (Display and Programmer)
· LED I/O board · Miniature fuel pump
· Electronic starting gas valve
· Electronic Fuel valve
· Fuel tubing, tubing connector set, filters, and cable set
· 6 cell, 2400mA battery pack
· Starting gas tank
· Turbine mounting clamp
· Detailed instruction manual
| Thrust: | 45 lbs @ 112,000
RPM |
| Weight: |
5 LB |
| Diameter: | 5.12 inches |
| RPM Range: | 32,000 - 112,000 RPM |
| Exhaust gas temp.: | 580°C-690°C |
| Fuel consumption: | 24 oz per/min at
full power |
| Fuel: | Jet A1, 1-K
kerosene |
| Lubrication: | approximately 5%
synthetic Oil in the fuel |
| Maintenance interval: | 25 hours |

JetCat TITAN SE turbine complete with starter includes:
TITAN Thrust Chart
| RPM | Thrust |
| 32,000 | 1.0 |
| 100,000 | 19.0 |
| 105,000 | 22.0 |
| 115,000 | 28.5 |
| 120,000 | 31.8 |
| 123,000 | 34.0 |
| Thrust: | 34 lbs @ 123,000
RPM |
| Weight: | 3.1 LB |
| Diameter: | 4.4 inches |
| RPM Range: | 32,000 - 123,000 RPM |
| Exhaust gas temp.: | 650°C-770°C |
| Fuel consumption: | 16 oz per/min at
full power |
| Fuel: | Jet A1, 1-K
kerosene |
| Lubrication: | approximately 5%
synthetic turbine oil in the fuel |
| Maintenance interval: | 25 hours |

JetCat P-180 turbine comes complete with HEAVY DUTY starter and
includes:
|
Thrust:
|
45 lbs @ 110,000 RPM |
|
Weight: |
5 LB |
|
Diameter: |
4.72 inches |
|
RPM Range: |
32,000 - 111,000 RPM |
|
Exhaust gas temp.: |
580°C-720°C |
|
Fuel consumption: |
24 oz per/min at full power |
|
Fuel: |
Jet A1, 1-K kerosene |
|
Lubrication: |
approximately 5% synthetic turbine oil in the fuel |
|
Maintenance interval: |
25 hours |

JetCat P-80 turbine
complete with starter includes:
P80 Thrust Chart
| RPM | Thrust |
| 35,000 | 0.8 |
| 85,000 | 8.0 |
| 93,000 | 10.0 |
| 101,000 | 12.5 |
| 110,000 | 15.0 |
| 117,000 | 17.0 |
| 123,000 | 21.0 |
| Thrust: |
21 LB @ 123,000 RPM |
| Weight: |
2.9 LB, incl. starter |
| Diameter: |
4.4 inches |
| RPM Range: |
35,000 - 120,000 |
| Exhaust gas temp.: |
580°C -690°C |
| Fuel consumption: |
9 oz per/min at full power |
| Fuel: |
Jet A1, 1-K kerosene |
| Lubrication: |
approximately 5% synthetic turbine oil
in the fuel |
| Maintenance interval: |
25 hours |

P120 Thrust Chart
|
V4.0-5.0 ECU with a maximum of 123K RPM allowable in the
limits menu. |
Thrust |
|
33,000 |
1.0 |
|
82,000 |
9.5 |
|
90,000 |
12.0 |
|
92,500 |
13.0 |
|
98,500 |
15.0 |
|
103,500 |
17.0 |
|
105,500 |
18.0 |
|
111,000 |
20.0 |
|
115,000 |
22.0 |
|
119,000 |
24.0 |
|
121,000 |
26.0 |
|
123,000 |
28.0 |
|
Thrust:
|
Thrust is 28 lbs @ 123,000 RPM |
|
Weight: |
3.1 LB |
|
Diameter: |
4.4 inches |
|
RPM Range: |
33,000 - 123,000 RPM |
|
Exhaust gas temp.: |
580°C-690°C |
|
Fuel consumption: |
12oz/min at full power |
|
Fuel: |
Jet A1, 1-K kerosene |
|
Lubrication: |
approximately 5% synthetic turbine oil in the fuel |
|
Maintenance interval: |
25 hours |

JetCat P-70 turbine complete
with starter includes:
P70 Thrust Chart
| RPM | Thrust |
| 38,000 | 0.75 |
| 93,000 | 8.0 |
| 101,000 | 10.0 |
| 107,000 | 12.0 |
| 113,000 | 14.0 |
| 118,000 | 16.0 |
| 123,000 | 17.5 |
| Thrust: |
17.5 LB @ 123,000 RPM |
| Weight: |
2.6 LB, incl. starter |
| Diameter: |
3.7 inches |
| RPM Range: |
35,000 - 123,000 |
| Exhaust gas temp.: |
620°C |
| Fuel consumption: |
8 oz per/min at full power |
| Fuel: |
Jet A1, 1-K kerosene |
| Lubrication: |
approximately 5% synthetic turbine oil
in the fuel |
| Maintenance interval: |
25 hours |
| Thrust: | 13 LB @
165,000 RPM |
| Weight: | 1.87 LB,
incl. starter |
| Diameter: | 3.25 inches |
| RPM Range: | 50,000 -
165,000 |
| Exhaust gas temp.: | 580°C -690°C |
| Fuel consumption: | 8 oz per/min
at full power |
| Fuel: | Jet A1, 1-K
kerosene |
| Lubrication: | approximately
5% synthetic turbine oil in the fuel |
| Maintenance interval: | 25 hours |
